Explore Posterous

sqlshots: Delivering subscriptions outside the Organization

Recently I faced an issue with reporting services 2005 when attempting to deliver subscriptions to addresses outside of the organization. Internal addresses received the email based subscription deliveries without any questions. I must have checked and re-checked the settings using RSConfigTool about million times, looking for anything I might have overlooked. The error message I received was, "The e-mail address of one or more recipients is not valid". After some research (which lead me to a lot of dead ended forums) I read the phrase "email relay", that's when the gears started spinning.

I realized that the issue had nothing to do with the configuration of SQL Server Reporting Services; rather, the SMTP server! In order for the messages to be delivered outside of the organization the Reporting Services Server needed to be authorized so-to-speak. Unfortunately I don't have access to Exchange 2003 so I cannot provide screen shots, but for 2007 all you need to do is add the server's IP Address to the SMTP server’s receiver group in the HUB Transport configs.

Then to test your subscription without tweaking the schedule execution time just run the SQL job! First find out the name of the job by using the attached sql script, then execute the sp_start_job. If you have a named instance append $instancename to all three of ReportServer occurrences within the sql script (i.e. ReportServer$InstanceName) for MSSQL 2005. I believe for MSSQL 2008 you would append _InstanceName (i.e. ReportServer_InstanceName), but I am not certain. You should get the results similar to the screen shot attached.

   

Click here to download:

sqlshots_Delivering_subscripti.zip (54 KB)

Click here to download:

SELECT.Get_RSSubscription_Jobs_v0.02.sql (0 KB)

Loading mentions Retweet

Comment (0) »

sqlshots: Querying tables without a (JOIN CLAUSE)

Typically you would use a JOIN clause when querying from multiple tables, but no one said you have to. Say for example you wanted to query two tables (tableA & tableB) which did not have any relationship (no one-to-one at all), yet there are fields in which would permit a comparison. Say street number, pre-direction, street name and the suffix.

Well you would compare
(tableA.street number = tableB.street number) and
(tableA.pre-direction = tableB.pre-direction) and
(tableA.street name = tableB.street name) and
(tableA.suffix = tableB.suffix).

Well I did not have a sample dataset for that illustration but I do have the AdventureWorks database, so here we go.

This first example will illustrate a query using a JOIN clause.

Results

This example illustrates a query without using a JOIN clause.

Results

As you can see the results are the same, but the queries are a tad different.

-- samson

Loading mentions Retweet

Comment (0) »

sqlshots: SELECT-TRIM-CASE-CONCAT

In this particular scenario I needed to concatenate a set of fields into a single column. So essentially I needed to trim all the leading zeros from the street number field first (via my udf_TrimLeadingZeros), then pieced the street number, pre-direction, street name and suffix all into one field. However, every row did not have a pre-direction or a suffix; nonetheless, I needed everything formatted (evenly spaced between words) and displayed as a single string.

So I figured I would use a CASE expression (http://bit.ly/PiYQF) in conjunction with a String Concatenation (http://bit.ly/FJtq9) to achieve my end result. Typically I see a period (.) appended to the pre-direction, but in this case it wasn't required. However if you do need it simply add a period to line 14 between the ticks '. ' of the attached select script (see pre-direction with periods screen shot for details).

Pre-Direction without periods

Pre-Direction with periods

Click here to download:

CREATE.udf_TrimLeadingZeros_v0.01.sql (0 KB)

Click here to download:

SELECT.Trim-Case-ConCat_v0.01.sql (0 KB)

Loading mentions Retweet

Comment (0) »

sqlshots: Identity Columns

There are a lot of sites out there that give an in-depth definition of identity columns (this ain't one of them), but I have to admit that it was something I took for granted recently. In my task to clean up geospatial address data, specifically for geo-coding purposes I over looked the goodness of having an identity field as part of table. The data that I received did not have an ID field and for some odd reason I thought nothing of. I figured I would make updates by comparing multiple columns to target specific rows.  Well that worked fine until I realized that I had duplicate data. Digging myself deeper into a whole I kept doing things the hard way, well let's just say I did things the less efficient way.

Once I finally realized what I had been doing was inefficient I decided to introduce an ID field to the table. However old habits are hard to kill. Typically when I create ID fields I always leave (identity) off because I use UDFs to generate my sequential numbering. Reason being if there is ever a need to remove a record or delete a record (which seldom occurs since I use bit fields to designate active versus inactive records) the numbering continues. So if I have rows one through five and physically delete row five (ID 5), my next insert will become ID 6. Making the sequence 1,2,3,4,6.

Some may disagree but I really don't like that and no I am not OCD. It's just that I hate wasting IDs and avoid it whenever possible, hence my dilemma. So I add the column via the UI and save my changes. Then I start to think what is the best way to populate this newly added column. Not seeing the obvious (big rookie mistake on my part) I must have wasted 30 mins to an hour before I stepped away to grab a drink. Then all of a sudden it occurred to me that I could drop the column and re-add it via alter statement and all my worries would be gone. Which I did. You can do the same using the UI.

One simple single line could have prevented a self inflicted heartache because I was being an idiot. Once I ran it, the row was created and populated in sequential order. Just goes to show sometimes you need to step away from the task at hand to see what you are doing wrong! Granted I only needed the column temporarily; nonetheless, it helped a great deal when running bulk updates and having to compare a single column versus five to six. Especially when dealing with hundreds of thousands of records.

ALTER STATEMENT:

ALTER TABLE TableName ADD ID INT IDENTITY(1,1) 

Just to give you a visual of what exactly transpired here is little step by step (example data only):

BEFORE AND AFTER

1) SELECT * FROM TestTable

2) ALTER TABLE TestTable ADD ID INT IDENTITY(1,1)

3) SELECT * FROM TestTable

Loading mentions Retweet

Comment (0) »

SQLShots: Simple Date Calculation

I work a great deal with SQL Server Reporting Services and in some (if not most) of my previous reports I often needed to calculate the number of days between two given dates. Usually the amount of days a Work Order has been open, how many days it's past due and such. Well using the DateDiff() function it makes it really simple to accomplish. However If you need to calculate age there is a bit more logic required. See Jacob's post at http://bit.ly/2O2qWW for further deatils.

Click here to download:

DateCalculation.sql (0 KB)

Loading mentions Retweet

Comment (0) »

UPDATED - SQL: Parsename Replace RTRIM LTRIM

Attached in the [DOWNLOAD SECTION] is a script titled "FourPartStringParse_v0.01.sql" that will parse out an address. It has limitations though. See the file comments for details. Thanks to @MarlonRibunal for the help!

I tried this route, but the problem with this script is that it counts every space.  So if there happens to be a double space between two words then it gets added to the total count.  

DECLARE @String NVARCHAR(100)
SET @String = 'How many words are  there in this big string?'
SELECT @String,(1 + LEN(@String) - LEN(REPLACE(@String, ' ', ''))) AS WordCount  as you can see in the illustration below.

The following method worked better, but I still had some issues with it as I mentioned before.

Click here to download:

FourPartStringParse_v0.01.sql (0 KB)

Loading mentions Retweet

Comment (0) »

Identify the T-SQL being run by a SPID

This is one I used to use a lot, and had cause to use it this morning.  An ETL process to truncate a staging table was being blocked by another process on the server, and I needed to identify exactly what command the blocking process was attempting to execute.  I found the SPID by executing sp_who2, which showed me the SPID that was blocking the truncate command (in this case SPID 54).  I then executed the following command to find out exactly what command was causing the block to happen:

DBCC inputbuffer(54)

The result set returned shows the actual T-SQL that was last executed for that SPID, which was a very large insert from a remote PostgreSQL database. 

This is a quick and useful method for tracking down issues and investigating what is happening on your server.

Loading mentions Retweet

Comment (0) »

DotNetNuke Jobs: ASP.NET DotNetNuke SCRUM at Vortalsoft

ONLY GC / USCZT

Here are the details:

SSRS

1) They must have FLAWLESS communication skills
2) 5+ years experience with Web & Winforms-NEED to see BOTH in there
3) .NET 3.5 vs. 2008
4) ASP.NET, AJAX, DHTML, XML, T-SQL
5) Web services and experience with Data Mapping or Active Records

PLUS:
6) DotNetNuke
7) SCRUM

More

Loading mentions Retweet

Comment (0) »

Get Date From DateTime In SQL

Loading mentions Retweet

Comment (0) »

Correcting DATETIME values (and Agent!) due to an incorrect system date

Loading mentions Retweet

Comment (0) »